Multi Use Foam fire extinguisher id marker sign

The Multi Use Foam Fire Extinguisher ID Marker Sign provides clear and highly visible identification of the location and type of a multi use foam fire extinguisher. Positioned directly above or adjacent to the extinguisher, the marker helps employees, visitors and other building users quickly recognise the equipment and distinguish it from other extinguisher types provided within the premises.

Multi use foam extinguishers are designed to provide effective firefighting performance across more than one type of fire risk, depending on the formulation, approvals and fire ratings of the individual extinguisher. Many foam extinguishers are suitable for Class A fires involving solid combustible materials and Class B fires involving certain flammable liquids.

On suitable Class A fires, foam extinguishers can provide a cooling and wetting action that helps reduce the temperature of burning materials such as wood, paper, cardboard and many textiles. On suitable Class B fires, foam can form a layer over the fuel surface that helps suppress flammable vapours and reduce the possibility of re-ignition.

Suitable applications can include offices, schools, warehouses, factories, workshops, hotels, retail premises, commercial buildings and other environments where the particular multi use foam extinguisher has been selected to address the identified fire risks.

The Multi Use Foam Fire Extinguisher ID Marker Sign provides an immediate visual reference to the extinguisher type. This is particularly useful at fire points where several different firefighting appliances are installed together and users need to distinguish the foam extinguisher from water, CO2, dry powder, wet chemical or other extinguisher types.

The term multi use should not be interpreted as meaning that the extinguisher is suitable for every type of fire. The approved applications can vary between different foam extinguisher products, so users should always check the fire classifications, ratings and limitations displayed on the individual extinguisher.

Foam extinguishers should not automatically be used on fires involving flammable gases or cooking oils and fats unless the individual extinguisher is specifically tested, approved and marked for the particular application. Correct equipment selection is essential to avoid ineffective or potentially hazardous firefighting attempts.

Particular care is required where live electrical equipment is involved. Some modern foam extinguishers may have specific electrical safety test information or operating guidance, but suitability should never be assumed. Users should follow the markings and manufacturers instructions provided with the individual extinguisher.

The ID marker should be positioned where it remains clearly visible and accurately identifies the multi use foam extinguisher located below or nearby. The extinguisher should remain readily accessible and should not be obstructed by furniture, stock, machinery, displays, deliveries or stored materials.

Clear identification can also assist with routine fire safety inspections and maintenance. The marker makes it easier to confirm that the correct extinguisher type remains at its designated location. If the extinguisher is replaced with a different type, the associated identification marker should also be reviewed and changed where necessary.

Anyone expected to use portable firefighting equipment should receive appropriate information and instruction. A person should only attempt to tackle a small fire where it is safe to do so, the extinguisher is suitable for the fire involved and a clear means of escape remains available.

If a fire is spreading rapidly, producing significant smoke or cannot be safely controlled, occupants should raise the alarm, evacuate to a place of safety and contact the Fire and Rescue Service in accordance with the premises emergency procedures.

The Multi Use Foam Fire Extinguisher ID Marker Sign can form part of a wider fire equipment identification system alongside Water, Water Additive, Water Mist, CO2 Carbon Dioxide, Dry Powder and Wet Chemical Fire Extinguisher signs, Fire Blanket signs and Fire Point signs.

Fire extinguishers should be appropriately inspected and maintained by competent persons to ensure they remain serviceable and ready for use. Any extinguisher that has been discharged, damaged, tampered with or is otherwise suspected of being unserviceable should be reported and dealt with promptly.

Signage should complement rather than replace an appropriate fire risk assessment, correct extinguisher selection, formal maintenance, staff training and emergency procedures. The fire ratings and approved applications of the particular multi use foam extinguisher should always be confirmed from the markings and information supplied with the unit.

Manufactured from durable, high quality materials with excellent print clarity and visibility, the Multi Use Foam Fire Extinguisher ID Marker Sign provides a professional and long lasting solution for identifying multi use foam firefighting equipment. It helps improve extinguisher recognition, support correct equipment selection and ensure the appropriate fire extinguisher can be quickly located when required.

Materials available for this product

Self Adhesive Vinyl Sticker

Description:

A self adhesive vinyl plus other stuff in here too

Thickness:

95 micron

Fixing Options:

Self Adhesive

1mm Rigid

Description:

1mm Rigid PVC plastic full descritption

Thickness:

900 micron

Fixing Options:

Can be screwed or glued

Rigid Photoluminescent

Description:

Rigid Photoluminescent (GITD) Glow in the dark

Thickness:

1mm

Fixing Options:

*indicates your currently selected material