Fire Pump Start Button Sign

The Fire Pump Start Button Sign provides clear and highly visible identification of the manual start control for a fire pump system. Positioned directly adjacent to the relevant button or control, the sign helps authorised personnel, maintenance engineers and emergency responders quickly recognise the correct control when the fire pump needs to be started.

Suitable for factories, warehouses, distribution centres, commercial buildings, industrial premises, hospitals, shopping centres, large residential developments and other locations equipped with pumped fire protection systems, this sign provides a simple and effective method of identifying an important fire safety control.

Fire pumps are used in certain fire protection systems to provide or maintain the water pressure and flow required for firefighting equipment. Depending on the installation, a fire pump may supply sprinkler systems, wet risers, hydrants or other fixed firefighting systems where the available water supply alone cannot provide the required performance.

Clear identification of the Fire Pump Start Button can be particularly important in plant rooms, pump rooms and fire control areas containing multiple switches, control panels and other equipment. Prominent signage helps reduce the possibility of confusion and allows the correct control to be located without unnecessary delay.

The sign can also assist engineers and authorised personnel during routine inspection, testing and maintenance by clearly identifying the manual fire pump start control. This helps distinguish the button from stop controls, alarm controls, test switches and other equipment that may be installed nearby.

The Fire Pump Start Button Sign can form part of a wider fire protection identification system alongside Fire Pump signs, Sprinkler Stop Valve signs, Sprinkler Control Valve signs, Wet Riser signs, Fire Brigade Inlet signs and other notices identifying essential firefighting equipment and controls.

Access to the fire pump start button should remain clear and the sign should be positioned where it can be easily seen. The control should not be obstructed by stored materials, machinery, furniture or other equipment that could delay access when it is required.

Operation of fire pump controls should be restricted to appropriately authorised or trained personnel except where emergency procedures specify otherwise. Incorrect operation or interference with fire protection equipment could affect the availability or performance of the system.

Fire pumps, controls and associated fire protection systems should be appropriately inspected, tested and maintained by competent persons in accordance with the requirements applicable to the particular installation. Any faults identified during testing or maintenance should be addressed promptly to ensure the system remains available when required.

Signage should complement rather than replace appropriate fire protection design, operating instructions, maintenance procedures, staff training and emergency planning. The correct operation of the fire pump should always follow the instructions and procedures established for the specific system.

Manufactured from durable, high quality materials with excellent print clarity and visibility, the Fire Pump Start Button Sign provides a professional and long lasting solution for identifying an important fire protection control. It helps improve equipment identification, support effective maintenance and testing procedures and assist authorised personnel and emergency responders in quickly locating the fire pump start button when required.

Materials available for this product

Self Adhesive Vinyl Sticker

Description:

A self adhesive vinyl plus other stuff in here too

Thickness:

95 micron

Fixing Options:

Self Adhesive

1mm Rigid

Description:

1mm Rigid PVC plastic full descritption

Thickness:

900 micron

Fixing Options:

Can be screwed or glued

Inside Window fixing Sticker

Description:

Reverse printed onto high-quality self-adhesive vinyl with the adhesive applied to the front of the graphic. This allows the sign to be fixed to the inside of glazing while remaining fully visible and readable from the outside.

Thickness:

195mic

Fixing Options:

To be applied to the inside face of the glass and viewed from the opposite side. For best results, ensure the glass surface is clean, dry and free from dust, grease and contaminants before application.

*indicates your currently selected material