Fire Fighter's Switch Sign

The Fire Fighters Switch Sign provides clear and highly visible identification of a designated firefighters switch, helping fire and rescue service personnel quickly locate an important emergency control when attending an incident. The sign can be positioned adjacent to the relevant switch so that its purpose can be immediately recognised.

Firefighters switches are used to provide a means of emergency isolation for certain electrical installations and equipment that could present an additional hazard during firefighting operations. Clear identification is particularly important where several electrical controls, isolators or switches are installed within the same area.

Suitable for commercial premises, retail buildings, offices, industrial facilities, entertainment venues and other locations where a firefighters switch is installed, this sign helps ensure the control can be readily distinguished from ordinary electrical switches and building controls.

Firefighters switches are commonly associated with installations such as high voltage luminous tube signs and certain high voltage lighting equipment. Depending on the building and electrical installation, designated emergency controls may also be provided for other equipment in accordance with the relevant design requirements.

During an emergency, rapid identification of electrical isolation controls can assist fire and rescue service operations by reducing the time required to locate the correct switch. The Fire Fighters Switch Sign provides a permanent visual reference and helps prevent confusion with unrelated electrical equipment.

The switch and its associated signage should be positioned so that they remain clearly visible and readily accessible. Access should not be obstructed by stock, vehicles, furniture, advertising displays or other items that could delay emergency personnel when the control is required.

The Fire Fighters Switch Sign can form part of a wider fire service identification system alongside Fire Fighting Lift signs, Fire Fighting Lobby signs, Dry Riser Inlet signs, Wet Riser signs, Gas Shut Off Point signs and other notices identifying emergency controls and firefighting facilities.

Electrical installations and emergency isolation arrangements should be designed, installed, inspected and maintained by appropriately competent persons. The switch should be clearly identified and periodically checked as appropriate to ensure it remains accessible, correctly labelled and suitable for its intended purpose.

Signage should complement rather than replace appropriate electrical safety measures, emergency procedures, maintenance and fire risk management arrangements. The correct type and location of a firefighters switch should be determined according to the electrical installation and requirements applicable to the particular premises.

Manufactured from durable, high quality materials with excellent print clarity and visibility, the Fire Fighters Switch Sign provides a professional and long lasting solution for identifying designated emergency isolation controls. It helps firefighters quickly recognise essential equipment and supports effective fire and rescue service operations during an emergency.

Materials available for this product

Self Adhesive Vinyl Sticker

Description:

A self adhesive vinyl plus other stuff in here too

Thickness:

95 micron

Fixing Options:

Self Adhesive

1mm Rigid

Description:

1mm Rigid PVC plastic full descritption

Thickness:

900 micron

Fixing Options:

Can be screwed or glued

Inside Window fixing Sticker

Description:

Reverse printed onto high-quality self-adhesive vinyl with the adhesive applied to the front of the graphic. This allows the sign to be fixed to the inside of glazing while remaining fully visible and readable from the outside.

Thickness:

195mic

Fixing Options:

To be applied to the inside face of the glass and viewed from the opposite side. For best results, ensure the glass surface is clean, dry and free from dust, grease and contaminants before application.

*indicates your currently selected material