Danger quarry workings sign

This Danger Quarry Workings Sign provides a clear and highly visible warning that hazardous quarry workings are present within or beyond the identified area. The sign helps alert workers, contractors, visitors and members of the public to the potentially serious dangers associated with active or disused quarry sites.

Quarry workings can contain a wide range of hazards including steep faces, deep excavations, unstable ground, sudden drops, loose rock, heavy machinery, vehicle movements and areas of deep water. The prominent Danger heading immediately attracts attention, while the Quarry Workings message clearly identifies the nature of the hazardous area.

This sign is suitable for active quarries, disused quarries, aggregate sites, mineral extraction areas, stone workings, sand and gravel pits and other locations where quarry related hazards may be present. It can be positioned at quarry entrances, gates, fences, perimeter boundaries, access tracks and other locations where people could approach or enter the workings.

Quarry sites can be particularly dangerous to people who are unfamiliar with the area. Hazards that are obvious to experienced quarry personnel may not be recognised by visitors or members of the public. Steep quarry faces and excavation edges can present a serious fall hazard. Ground close to an edge may also be unstable and should not be assumed to be safe simply because it appears solid.

Loose rock and material can fall from quarry faces without warning, particularly following excavation, blasting, heavy rainfall, frost or other changes in ground conditions. Active quarry workings may involve excavators, loading shovels, dump trucks, crushers, conveyors and other large machinery. These vehicles and machines can have significant blind spots and require carefully controlled operating areas.

Pedestrians should be appropriately separated from quarry vehicles and mobile plant, with designated routes and controlled access arrangements used where necessary. Where blasting operations take place, specialist procedures, exclusion zones, warning systems and other appropriate controls should be established. A general Danger Quarry Workings Sign should not be used as a substitute for specific blasting warnings and procedures.

Disused quarry workings can remain hazardous long after extraction activities have stopped. Unstable faces, hidden drops, deteriorating structures and changing ground conditions may continue to present significant risks. Water filled quarry workings can be particularly dangerous. Quarry water may be extremely deep, cold and difficult to exit, with submerged ledges, machinery, debris or sudden changes in depth that cannot be seen from the surface.

Where water hazards are present, additional Deep Water, No Swimming or other appropriate warning and prohibition signs should be considered according to the risks at the location. This Danger Quarry Workings Sign can be displayed alongside Keep Out, No Unauthorised Access, Heavy Plant Operating, Beware Moving Vehicles, Deep Water and other appropriate quarry safety signs.

Where access is restricted, warning signage should be supported by suitable fencing, gates, barriers and other physical security measures appropriate to the site. A warning sign should not be relied upon as the sole means of preventing access where quarry workings present a serious risk to members of the public or unauthorised personnel.

Quarry operators should consider areas where people may attempt to enter the site, including public footpaths, tracks, neighbouring land and locations where perimeter fencing could be bypassed or damaged. Multiple signs may be appropriate around a large quarry perimeter so that the warning remains visible from the different directions in which people could approach the workings.

Signs should be positioned where they can be clearly seen before a person reaches the hazardous area and should not be obscured by vegetation, stored materials, machinery or other objects. Active quarry operations should be appropriately planned and managed in accordance with applicable quarry and workplace health and safety requirements, including the Quarries Regulations 1999 where relevant.

Risk assessments and site procedures should take account of the specific hazards associated with the quarry, including ground stability, quarry faces, excavations, vehicle movements, machinery, water, blasting and public access where applicable. Where personal protective equipment is required for authorised personnel entering operational areas, separate mandatory signs should clearly identify the PPE that must be worn.

Quarry conditions can change as extraction progresses, faces are worked and vehicle routes are altered. Warning signs, barriers and access arrangements should therefore be regularly reviewed and repositioned where necessary. Disused quarry sites should also be periodically assessed where there is a possibility of public access, deterioration or changing ground and water conditions.

This Danger Quarry Workings Sign provides an important visual warning but should complement rather than replace risk assessment, secure boundaries, access control, traffic management, ground stability measures and other appropriate quarry safety arrangements.

Manufactured from durable, high quality materials with clear print and excellent visibility, this Danger Quarry Workings Sign provides a professional and long lasting solution for warning workers, visitors and the public about the potentially serious hazards associated with active and disused quarry workings.

Materials available for this product

Self Adhesive Vinyl Sticker

Description:

A self adhesive vinyl plus other stuff in here too

Thickness:

95 micron

Fixing Options:

Self Adhesive

1mm Rigid

Description:

1mm Rigid PVC plastic full descritption

Thickness:

900 micron

Fixing Options:

Can be screwed or glued

3mm Foamex

Description:

3mm Foamex Plastic full descrioption in here

Thickness:

3mm

Fixing Options:

Can be screwed or glued

*indicates your currently selected material