Wet Chemical fire extinguisher sign

The Wet Chemical Fire Extinguisher Sign provides clear and highly visible identification of the location and type of a wet chemical fire extinguisher. Displaying the sign directly above or adjacent to the extinguisher helps employees, catering staff and other building users quickly recognise the equipment and distinguish it from other types of fire extinguisher.

Wet chemical extinguishers are particularly associated with Class F fires involving cooking oils and fats. They are therefore commonly provided in commercial kitchens, restaurants, cafes, hotels, pubs, canteens, takeaways, schools, hospitals, care homes and other catering environments where deep fat fryers and similar cooking equipment are used.

Cooking oil and fat fires can reach extremely high temperatures and require an extinguishing medium suitable for the particular hazard. Wet chemical extinguishers are specifically designed for this type of risk and are commonly selected where significant quantities of cooking oils or fats are present.

When correctly applied to a suitable Class F fire, the wet chemical extinguishing agent helps cool the burning oil or fat and forms a layer over the surface that helps suppress the fire and reduce the possibility of re-ignition. The precise performance and approved fire ratings of an extinguisher should always be confirmed from the information provided on the individual unit.

The Wet Chemical Fire Extinguisher Sign helps users identify the correct extinguisher without relying solely on the appearance or colour coding of the extinguisher itself. This can be particularly useful where several extinguisher types are positioned together to cover different fire risks within the same area.

The sign should be positioned where it remains clearly visible and where it accurately identifies the wet chemical extinguisher located below or nearby. Fire extinguishers should remain readily accessible and should not be obstructed by kitchen equipment, furniture, stock, waste containers or stored materials.

Wet chemical extinguishers are commonly installed near cooking areas, but they should be positioned so that a person does not need to move dangerously close to a fire in order to reach the equipment. The appropriate location should be determined as part of the premises fire risk assessment and fire safety arrangements.

Users should follow the operating instructions displayed on the extinguisher and should only attempt to tackle a fire where it is safe to do so. If a fire is spreading, producing significant smoke or cannot be safely controlled, occupants should raise the alarm, evacuate the area and contact the Fire and Rescue Service in accordance with the premises emergency procedures.

Water should not be thrown onto burning cooking oil or fat. Doing so can cause a violent reaction and spread burning material, significantly increasing the risk of serious injury and fire spread. The correct firefighting equipment should always be selected for the particular hazard.

The Wet Chemical Fire Extinguisher Sign can form part of a wider fire equipment identification system alongside Water, Foam, CO2 and Dry Powder Fire Extinguisher signs, Fire Blanket signs, Fire Point signs and Fire Alarm Call Point signs. Clear identification helps ensure different types of firefighting equipment can be recognised quickly.

Fire extinguishers should be appropriately inspected and maintained by competent persons to ensure they remain serviceable and ready for use. Any extinguisher that has been discharged, damaged, tampered with or is otherwise suspected of being unserviceable should be reported and dealt with appropriately.

Signage should complement rather than replace an appropriate fire risk assessment, suitable firefighting equipment, staff training and emergency procedures. The selection of a wet chemical extinguisher should be based on the specific fire risks present and the suitability and rating of the individual extinguisher.

Manufactured from durable, high quality materials with excellent print clarity and visibility, the Wet Chemical Fire Extinguisher Sign provides a professional and long lasting solution for identifying specialist firefighting equipment. It helps improve extinguisher recognition, support correct equipment selection and reinforce fire safety arrangements in commercial kitchens and other areas where cooking oil and fat fire risks are present.

Wet Chemical fire extinguisher sign * We can add your company logo/contact details at no extra cost. Min quantity 50 Contact our sales team following checkout or simply add a note in the notes section. * Does not appear on the signs.

Materials available for this product

Self Adhesive Vinyl Sticker

Description:

A self adhesive vinyl plus other stuff in here too

Thickness:

95 micron

Fixing Options:

Self Adhesive

1mm Rigid

Description:

1mm Rigid PVC plastic full descritption

Thickness:

900 micron

Fixing Options:

Can be screwed or glued

Rigid Photoluminescent

Description:

Rigid Photoluminescent (GITD) Glow in the dark

Thickness:

1mm

Fixing Options:

*indicates your currently selected material