Hydrospray Fire Extinguisher id marker sign

The Hydrospray Fire Extinguisher ID Marker Sign provides clear and highly visible identification of the location and type of a Hydrospray fire extinguisher. Positioned directly above or adjacent to the extinguisher, the marker helps employees, visitors and other building users quickly recognise the equipment and distinguish it from other types of fire extinguisher provided within the premises.

Hydrospray extinguishers are generally water based extinguishers incorporating an additive designed to improve firefighting performance. They are commonly associated with suitable Class A fires involving ordinary solid combustible materials such as wood, paper, cardboard and many textiles. The exact applications and fire rating should always be confirmed from the markings and instructions on the individual extinguisher.

Suitable locations can include offices, schools, hospitals, hotels, shops, warehouses, factories, public buildings and other commercial or industrial premises where Class A combustible materials form part of the identified fire risk.

Hydrospray extinguishers work primarily by cooling burning materials and reducing their temperature below the level required to sustain combustion. Depending on the particular formulation, the additive may improve the ability of the extinguishing agent to penetrate and wet burning materials compared with conventional water alone.

The Hydrospray Fire Extinguisher ID Marker Sign provides an immediate visual reference to the extinguisher type. This is particularly useful at fire points where several different extinguishers are positioned together and users need to distinguish between Hydrospray, foam, CO2, dry powder, wet chemical or other firefighting equipment.

Hydrospray extinguishers should not be assumed to be suitable for every type of fire. Unless specifically approved and marked otherwise, water based extinguishers should not be used on fires involving flammable liquids, flammable gases or cooking oils and fats. Users should always check the classifications and limitations shown on the individual extinguisher.

Particular care is required where live electrical equipment is involved. Some modern water based extinguishers may have specific electrical safety test information or operating guidance, but suitability should never be assumed. The individual extinguisher markings and manufacturers instructions should always be followed.

The ID marker should be positioned where it remains clearly visible and accurately identifies the Hydrospray extinguisher located below or nearby. The extinguisher itself should remain readily accessible and should not be obstructed by furniture, stock, machinery, deliveries, waste containers or stored materials.

Clear extinguisher identification can also assist during routine fire safety inspections and maintenance by making it easier to confirm that the correct type of extinguisher remains positioned at its designated fire point. If an extinguisher is replaced with a different type, the associated identification marker should also be reviewed and changed where necessary.

Anyone expected to use portable firefighting equipment should receive appropriate information and instruction. A person should only attempt to tackle a small fire where it is safe to do so, the correct extinguisher is available and a clear means of escape remains accessible.

If a fire is spreading rapidly, producing significant smoke or cannot be safely controlled, occupants should raise the alarm, evacuate to a place of safety and contact the Fire and Rescue Service in accordance with the premises emergency procedures.

The Hydrospray Fire Extinguisher ID Marker Sign can form part of a wider fire equipment identification system alongside Water, Foam, CO2 Carbon Dioxide, Dry Powder and Wet Chemical Fire Extinguisher signs, Fire Blanket signs and Fire Point signs. Consistent identification helps users quickly recognise the firefighting equipment provided throughout a building.

Fire extinguishers should be appropriately inspected and maintained by competent persons to ensure they remain serviceable and ready for use. Any extinguisher that has been discharged, damaged, tampered with or is otherwise suspected of being unserviceable should be reported and dealt with promptly.

Signage should complement rather than replace an appropriate fire risk assessment, correct extinguisher selection, formal maintenance, staff training and emergency procedures. The fire ratings and approved applications of the particular Hydrospray extinguisher should always be confirmed from the information supplied with the unit.

Manufactured from durable, high quality materials with excellent print clarity and visibility, the Hydrospray Fire Extinguisher ID Marker Sign provides a professional and long lasting solution for identifying Hydrospray firefighting equipment. It helps improve extinguisher recognition, support correct equipment selection and ensure the appropriate extinguisher can be quickly located when required.

Materials available for this product

Self Adhesive Vinyl Sticker

Description:

A self adhesive vinyl plus other stuff in here too

Thickness:

95 micron

Fixing Options:

Self Adhesive

1mm Rigid

Description:

1mm Rigid PVC plastic full descritption

Thickness:

900 micron

Fixing Options:

Can be screwed or glued

Rigid Photoluminescent

Description:

Rigid Photoluminescent (GITD) Glow in the dark

Thickness:

1mm

Fixing Options:

*indicates your currently selected material