Compressed Hydrogen Sign

The Compressed Hydrogen Sign is designed to clearly identify locations where compressed hydrogen gas is stored, handled or used. Providing a highly visible identification message, this sign helps alert employees, contractors, delivery personnel and visitors to the presence of hydrogen and reinforces the need to follow appropriate gas handling and workplace safety procedures.

Suitable for laboratories, factories, manufacturing plants, engineering facilities, research centres, hydrogen storage areas, gas cylinder compounds, energy facilities and other commercial or industrial premises, this sign can be positioned at entrances, cylinder stores, gas cages, plant rooms and other locations where compressed hydrogen is present.

Hydrogen is an extremely flammable gas and can form explosive mixtures with air. It also has a very low ignition energy, meaning that sparks, flames and other ignition sources can present a significant hazard where hydrogen is released. Because hydrogen is colourless and odourless, a leak may not be readily detected without appropriate monitoring equipment.

Compressed hydrogen cylinders and systems also present hazards associated with gas stored under pressure. Cylinders should be appropriately secured, protected from damage and stored and handled in accordance with the suppliers instructions and relevant workplace procedures. Suitable ventilation may also be required to prevent released hydrogen accumulating within enclosed areas.

Clearly displayed Compressed Hydrogen signage helps personnel identify the gas present before entering a storage area or carrying out work on associated equipment. This is particularly important for contractors, maintenance personnel and emergency responders who may not otherwise be familiar with the substances stored or used at the premises.

The Compressed Hydrogen Sign can form part of a wider gas safety system alongside No Smoking and No Naked Flames signs, compressed gas warnings, flammable gas signage, restricted access notices and appropriate emergency information. The exact combination of signage and control measures required should be determined by the quantity of hydrogen, storage arrangement, equipment and workplace risk assessment.

This sign can assist employers, facilities managers, laboratory managers and health and safety professionals in communicating hydrogen hazards and supporting compliance with relevant requirements including the Health and Safety at Work etc. Act 1974, the Dangerous Substances and Explosive Atmospheres Regulations and other applicable compressed gas safety requirements.

Manufactured from durable, high quality materials with excellent print clarity and visibility, the Compressed Hydrogen Sign provides a professional and long lasting solution for identifying hydrogen storage and use areas. It helps improve hazard awareness, reinforce safe gas handling procedures and support the effective management of compressed hydrogen within commercial, scientific and industrial environments.

Materials available for this product

Self Adhesive Vinyl Sticker

Description:

A self adhesive vinyl plus other stuff in here too

Thickness:

95 micron

Fixing Options:

Self Adhesive

Inside Window fixing Sticker

Description:

Reverse printed onto high-quality self-adhesive vinyl with the adhesive applied to the front of the graphic. This allows the sign to be fixed to the inside of glazing while remaining fully visible and readable from the outside.

Thickness:

195mic

Fixing Options:

To be applied to the inside face of the glass and viewed from the opposite side. For best results, ensure the glass surface is clean, dry and free from dust, grease and contaminants before application.

1mm Rigid

Description:

1mm Rigid PVC plastic full descritption

Thickness:

900 micron

Fixing Options:

Can be screwed or glued

3mm Foamex

Description:

3mm Foamex Plastic full descrioption in here

Thickness:

3mm

Fixing Options:

Can be screwed or glued

DiBond Aluminium (Wall Mounted)

Description:

Thickness:

Fixing Options:

DiBond Aluminium + Rail (Post Mounted)

Description:

DiBond Aluminium + Rail (Post Mounted)

Thickness:

3mm

Fixing Options:

*indicates your currently selected material