Automatic Smoke Vent Sign

The Automatic Smoke Vent Sign provides clear and highly visible identification of a smoke vent designed to operate automatically as part of a buildings fire and smoke control system. Displaying the sign helps employees, residents, contractors, maintenance personnel and emergency responders recognise that the identified vent performs an important fire safety function and should not be obstructed, disabled or interfered with.

Suitable for apartment blocks, high rise buildings, offices, hotels, hospitals, schools, shopping centres, residential developments, stairwells, corridors, atriums and other buildings equipped with automatic smoke ventilation systems, this sign can be positioned directly adjacent to the relevant vent, access point or associated equipment.

Automatic smoke vents are designed to open without requiring normal manual operation when activated by the buildings smoke control or fire detection system. Depending on the installation, they may be used to release smoke and hot gases from corridors, lobbies, stairways, atriums or other designated areas during a fire.

Automatic opening vents, often referred to as AOVs, can form part of a natural smoke ventilation system or a more complex smoke control arrangement. Their purpose and operating sequence will depend on the specific fire safety design of the building and the areas the system is intended to protect.

Clear identification is particularly important because an automatic smoke vent may resemble an ordinary window, roof vent, louvre or ventilation opening. The Automatic Smoke Vent Sign helps make its fire safety function clear and discourages inappropriate obstruction, alteration or interference.

Smoke ventilation systems can help control the accumulation and movement of smoke and hot gases during a fire. Depending on the building design, this may help maintain more tenable conditions on certain escape routes, support smoke clearance and assist fire and rescue service operations.

The area around an automatic smoke vent should remain clear so that the vent can open and operate as intended. Furniture, stored materials, decorations, temporary displays or other objects should not restrict its movement or obstruct the airflow required by the smoke control system.

The Automatic Smoke Vent Sign can form part of a wider smoke control identification system alongside Smoke Vent signs, Smoke Vent Shaft signs, Smoke Vent Control signs, AOV Control signs and other notices identifying essential fire safety and smoke ventilation equipment.

Automatic smoke vents, actuators, detectors, control panels, power supplies and associated components should be appropriately inspected, tested and maintained by competent persons in accordance with the requirements applicable to the particular installation. Any fault or obstruction that could affect operation should be addressed promptly.

Signage should complement rather than replace appropriate fire safety design, system maintenance, testing, emergency procedures and fire risk management. Automatic smoke ventilation equipment should not be isolated, altered or operated contrary to the procedures established for the specific installation.

Manufactured from durable, high quality materials with excellent print clarity and visibility, the Automatic Smoke Vent Sign provides a professional and long lasting solution for identifying automatically operated smoke ventilation equipment. It helps improve system recognition, discourage obstruction or interference and support the effective operation and maintenance of important fire safety systems.

Materials available for this product

Self Adhesive Vinyl Sticker

Description:

A self adhesive vinyl plus other stuff in here too

Thickness:

95 micron

Fixing Options:

Self Adhesive

1mm Rigid

Description:

1mm Rigid PVC plastic full descritption

Thickness:

900 micron

Fixing Options:

Can be screwed or glued

Inside Window fixing Sticker

Description:

Reverse printed onto high-quality self-adhesive vinyl with the adhesive applied to the front of the graphic. This allows the sign to be fixed to the inside of glazing while remaining fully visible and readable from the outside.

Thickness:

195mic

Fixing Options:

To be applied to the inside face of the glass and viewed from the opposite side. For best results, ensure the glass surface is clean, dry and free from dust, grease and contaminants before application.

*indicates your currently selected material